Item Description
Durable ceramic protection to shield matte surfaces!
Pinnacle Black Label Ceramic Matte Coating is an authentic ceramic coating designed to protect all matte surfaces. Safe for us on matte paint, matte and vinyl wraps, matte wheels, and paint protection film (PPF), Pinnacle Black Label Ceramic Matte Coating will not add any gloss the surface. Pinnacle Black Label Ceramic Matte Coating will enrich and nourish the surface, while also providing protection against contaminants. Pinnacle Black Label Ceramic Matte Coating makes your matte surfaces look as good as new, not altering the original look and feel.
Matte surfaces are not as common as painted surfaces, but just because you have something that is unique, it does not mean you can't take care of it properly. You want to be able to give your matte car the protection and look it deserves. You can achieve this with Pinnacle Black Label Ceramic Matte Coating. Matte surfaces are unlike paint surfaces and must be treated differently for this reason. Pinnacle Black Label Ceramic Matte Coating is designed to protect matte surfaces against environmental contaminants such as road grime and water spots.
 |
 |
|
 |
||
Not only will Pinnacle Black Label Ceramic Matte Coating protect your matte surface from future harm, but it will also keep your matte looking like new. Pinnacle Black Label Ceramic Matte Coating does this by enriching and nourishing the surface, keeping its original matte look and feel. Unlike ceramic coatings for regular paint, Pinnacle Black Label Ceramic Matte Coating will not add any gloss, as this is not the effect matte should give. Pinnacle Black Label Ceramic Matte Coating is safe to use on a variety of matte surfaces, including matte paint, matte and vinyl wraps, matte wheels and vinyl wrapped surfaces. As long as the surface is matte, it will be protected. Easy to apply, using a foam applicator in overlapping and even strokes and wiping clean with a microfiber towel. However, before applying, it is important to thoroughly prep the surface with a matte cleaner and with Pinnacle Black Label Diamond Surface Prep Spray.
DIRECTIONS:
-Use on a cool surface, out of direct sunlight.
-Using a dedicated matte cleaner, clean the surface to be coated to remove any dirt, dust and other debris.
-Prepare the surface for the coating with Pinnacle Black Label Diamond Surface Prep Spray.
-Working on 2 x 2 square foot panel at a time, apply 5-7 drops of Pinnacle Black Label Ceramic Matte Coating onto a foam coating applicator.
-Wipe onto the surface using overlapping strokes for even coverage.
-Allow to sit for approximately 1 minute before wiping away with a clean microfiber towel.
-Allow approximately 24 hours of curing time before exposing freshly coated surfaces to moisture.
50 ml.
Federal regulations prohibit the shipment of this products by air, UPS 3 Day, UPS 2, or US Mail. This item is shipped by UPS Ground only. Sorry but no APO or FPO addresses.
.