Item Description
Pinnacle GlassCoat Window Sealant with Rain Repellent is your key to crystal-clear visibility and safer driving—rain or shine. This advanced glass coating smooths out microscopic imperfections on your windshield, creating an ultra-hydrophobic surface that repels water like magic. Rain beads up and flies off, often making wipers optional even in heavy downpours.
Once applied, Pinnacle GlassCoat Window Sealant with Rain Repellent repels water like no other. The surface tension created by this coating beads and repels water more effectively than you thought possible. Even in the most torrential rainstorms, the water beads up and flies off so effortlessly you many do not need use the wipers!
Optimizing the smoothness of the glass surface with Pinnacle GlassCoat Window Sealant with Rain Repellent advanced coating technology increases water repellency and inhibits contaminants from sticking to glass. This keeps your glass clean and optically clear for extended amounts of time.
Maximum Performance = Regular Application to Windshield
Every time you use your windshield wipers, any dirt accumulated on the wiper blades and windshield is subsequently dragged across the windshield. This causes abrasive friction that will, over time, decrease the effectiveness of any glass coating. The simple solution to this problem is to re-apply Pinnacle GlassCoat Window Sealant with Rain Repellent on a regular basis. Those who frequently travel or live in areas where it rains regularly should apply Pinnacle GlassCoat Window Sealant with Rain Repellent monthly. Those who drive less frequently or live in drier climates should apply Pinnacle GlassCoat Window Sealant with Rain Repellent every 3-6 months.
Application Directions
- Work on a cool surface in the shade
- Glass must be clean, dry and free from any road film or other oily substances. Use Pinnacle Crystal Clear Glass Cleaner with Water Repellent to ensure glass is squeaky clean and ready to coat.
- Use a clean, soft foam or microfiber applicator pad. Apply some Pinnacle GlassCoat Window Sealant with Rain Repellent directly onto your applicator pad and then spread and thoroughly work over a section of glass using a circular overlapping motion.
- Allow the coating to dry 10 to 15 minutes. Softly wipe any excess product off using a clean, microfiber towel.
For best results, apply two coats to ensure uniform coverage.
Pinnacle GlassCoat Window Sealant with Rain Repellent works best on clean glass in new condition. If the glass to be treated does not feel slick and glassy, then for best performance we recommend polishing glass first using Pinnacle GlassWork Water Spot Remover.
16 oz.
Specifications:
| SKU(s) | PIN-820 |
| Product Form | Liquid |
| Applicable Finishes | Glass |
